Question:

How to check the Bridge+More dealer charger

Answer:

If you need to check the Bridge+More dealer charger:

Check the Bridge+More dealer charger by disconnection of battery (does not require the dealer to be charged or On):

• Please disconnect the charger.
• Please unscrew the 8 screws in the outer rim of the dealer (NOT the four screws close to the centre). This requires a Torx 10 screwdriver (it can also be done with an unbraco key): we have a small guide Disasemble guide v2

• Please disconnect the battery cable illustrated below.
  • Version 2.03, 2.04 and 2.05
     

• Please be careful – we suggest using a finger on each hand and use your nails – no tools – to drag the connector out as illustrated in the direction away from the dealer as shown with the arrow
• When you connect the charger again the dealer will start.

Please connect the battery again after the charger test – and notice the dealer will not start unless you connect a working charger