Question: How to do a fast calibration of the bridge dealer with only 4 cards? (Basic)
Answer:
A 4 card calibration is done if you insert 5, 7, Jack, and Queen of Heart as the first four cards of the deck of 52 cards the dealer read and deals.
When do you need a calibration – if you experience an increasing number of card read errors or for example if the dealer read red cards better than blue cards?
Please notice you can do a fast 4 card calibration (for both decks) or do a thorough calibration of the bridge dealer’s UV readers with 2 * 52 cards – see more here. In most cases, 4 cards calibration would be adequate. Before you do a 52 cards calibration you can first try to remove the calibration (in the Dealer menu) to set calibration to default).
Please – before you start a calibration please control that the bridge dealer does not have dirt in the UV readers. Please blow gently to remove any dirt or remove it with a rubber blower. Please do not use a sharp device or anything that can harm the UV readers or transmitters.
You can read more here – How to check the dealer’s UV readers for dirt?
A 4 card calibration is done if you insert 5, 7, Jack, and Queen of Heart as the first four cards of the deck of 52 cards – then the dealer reads and deals the mentioned four cards and makes a fast calibration. 4 card calibrations is recommended at the start of each game.
You can repeat the 4 card calibration as often as you like during a game
Please see the video guide here or click the picture below
Watch the video guide below by clicking on the image
