Bridge+More – How to test the Bridge+More dealer 

  • The Bridge+More Dealer can be tested with a number of tests mentioned below
  • The test are all found in the Dealer menu – click at these texts (illustration – your details will be different)
  • After you have selected the relevant test the dealer will show – when ready – “I’m ready”
  • In general – if Info Code 97 or 99 or no Info Codes or remarks – test isfinished – ready for further instructions, tests or to deal cards
The Bridge+More solution - the bridge revolution - for both club and private use

Bridge+More Test – Card Gap – How to test the Card Gap on the Bridge+More Dealer 

  • Before start please select any 3 cards for the test.
  • First please insert one card and wait for Info Code 99.

When dealer shows info Code 99, please insert 2 cards and wait for results.

Notice: Please use clean cards with no bends or damages

Result of test:

  • Error 98 – user inserted only one card or maybe dealer has a gap issue. Please try again maybe use 3 different cards.
  • Error 47 – dealer detected issues with a gap. Please contact us
  • Code 97 or no information – no remarks or issues.

Bridge+More Test – Light Filter Test – How to test the Light Filter on the Bridge+More Dealer 

  • Before start of the test please find all Aces in a deck of cards and sort as follows
    • Ace of Spades
    • Ace of Clubs
    • Ace of Hearts
    • Ace of Diamonds
  • Please insert the four aces in the mentioned order
  • Dealer will then read the four cards

Notice: Please use clean cards and make sure there is no dirt in the 6 UV reader holes

Result of test:

  • Info Code 97  – No remarks or issues – and all 4 cards should be ejected from N
  • Info Code 49 – Remarks or issues found. Please contact us
  • Notice – calibration are not required in advance of this test

Bridge+More Test – UV LED Test – How to test UV LED’s on the Bridge+More Dealer 

  • Please insert the one card
  • Dealer will then read the card

Notice: Please use clean cards and make sure there is no dirt in the 6 UV reader holes

Result of test:

  • Info Code 97  – No remarks or issues
  • Info Code 48 – Remarks or issues found. Please contact us
  • Notice – calibration are not required in advance of this test

Bridge+More Test – Stepper Engine Test – How to test Stepper Engine on the Bridge+More Dealer 

  • Dealer will be turning core 20 times.
  • No cards are to be inserted

Result of test:

  • If No remarks or issues all is fine
  • Info Code 88 – simply ignore
  • Other Info Code than 88 – Remarks or issues found. Please contact us
  • Notice – calibration are not required in advance of this test

Bridge+More Test – Stepper Engine Wear Test – How to test stepper engine for wear on the Bridge+More Dealer 

  • Dealer turns core from N to S
  • During the turn dealer detects state of stepper engine and wheel bearings.
  • No cards are to be inserted

Result of test:

  • If No remarks or issues all is fine
  • Info Code 45 – Remarks or issues found. Please contact us
  • Notice – calibration are not required in advance of this test

Bridge+More Test – Card Eject Test – How to test the Card Eject mechanism on the Bridge+More Dealer 

  • Dealer twill be doing card ejects 5 times
  • During the test dealer detects state of the eject mechanism and other relevant moving parts.
  • No cards are to be inserted

Result of test:

  • If no remarks or no issues all is fine
  • Info Code 75 – Remarks or issues found. Please contact us
  • Notice – calibration are not required in advance of this test

Bridge+More Test – Card Push & Pull Test – How to test Card Push mechanism & Pull mechanism on the Bridge+More Dealer 

  • Dealer twill be running push & pull mechanism for 5 times
  • During the test dealer detects state of engines and test the card push mechanism and other moving parts.
  • No cards are to be inserted

Result of test:

  • If no remarks or no issues all is fine
  • Info Code 44 – Remarks or issues found. Please contact us
  • Notice – calibration are not required in advance of this test

Bridge+More Test – Card Sensor Test – 

How to test the Card Sensor on the Bridge+More Dealer 

  • Please insert one card
  • Dealer will then read the card

Notice: Please use clean cards and make sure there is no dirt in the 6 UV reader holes

Result of test:

  • Info Code 97 or no remarks – then no remarks or no issues
  • Info Code 46 – Remarks or issues found with sencor number 7. Please contact us
  • Notice – calibration are not required in advance of this test

Bridge+More Test – Card Eject Test – How to test the Card Eject ports on the Bridge+More Dealer 

  • Please insert the 8 or more cards
  • Dealer will then read the cards

Notice: Please use clean cards and make sure there is no dirt in the 6 UV reader holes

Result of test:

  • Info Code 04 or no remarks – then no remarks or no issues
  • Info Code 01 or 02 or 03 – Remarks or issues found with specific port. Please contact us
  • Notice – when you take the cards the the number will change – it does not indicate an issue.
  • Notice – calibration are not required in advance of this test

Bridge+More Test – How to test battery on the Bridge+More Dealer 

  • Please make sure dealer is empty

The test measures battery charge and discharge during the test

Result of the test will shown on tablet with a simple advice – and more details are recorded by our log system – please contact us after the test with dealer number and date / time for the test